Stachybotrys requires a different level of response than common surface molds. Every service below reflects that.
🔍
Black Mold Identification & Assessment
Confirmed black mold removal starts with identification. Our Marietta, GA technicians collect surface swab samples from suspected areas and can have lab results confirming species within 24–48 hours. We don't assume Stachybotrys based on color — we confirm it, because the remediation protocol is different from standard mold removal and misidentification wastes your money.
😷
Full PPE & Containment Setup
Full body PPE, double polyethylene containment, negative air pressure, and sticky mat decon — this is the setup before a single piece of black-mold-contaminated material is disturbed in your Marietta, GA property.
🔨
Complete Stachybotrys Material Removal
Stachybotrys on drywall, ceiling tiles, or subflooring means those materials must be removed — not treated in place. The mycotoxin-containing material itself is the hazard, and surface biocides don't render it safe or remove it from your Marietta property. We remove contaminated materials, bag them in heavy-duty poly, and dispose of them through proper waste channels.
💧
Structural Surface Treatment & Encapsulation
After contaminated materials are removed, exposed structural framing is HEPA-vacuumed, treated with EPA-registered fungicide, and where appropriate, sealed with mold-resistant encapsulant. This dual approach — chemical treatment plus physical barrier — is the standard for Stachybotrys-affected structural materials in Marietta, GA.
📋
Independent Post-Removal Air Testing
After Black Mold Removal in any Marietta, GA property, an independent industrial hygienist collects post-removal air samples and sends them to an accredited lab. We will not declare a job complete without objective third-party confirmation that Stachybotrys spore counts have returned to acceptable levels.
🏗
Moisture Source Identification & Correction
Stachybotrys only grows on consistently wet cellulosic material. Its presence means there's been a sustained moisture source — typically a leaking pipe, roof infiltration, or chronic condensation issue. We identify and document the moisture source on every Marietta, GA black mold job and provide specific corrective recommendations, because removal without source correction means regrowth.
